Radio PIN code calculation from serial number.
Supported models: Toyota, Renault, Dacia.
Renault CAN immo emulator was developed for use with Renault vehicles to emulate immo system in ECU
SIRIUS 32 CAN
SIRIUS 34 CAN
3-socket DELPHI CAN - 95080 memory
3-socket BOSCH EDC15 CAN - 5P08C3 memory
EMS 3132 CAN
EMS 3134 CAN
OBDII tool with various Renault car electronic control unit internal memory modification functions, such as Read/Write EEPROM or FLASH, Clear Immobilizer Code, Read Immobilizer Status and Program Cards. There is no need to open control unit, de-solder memory IC or connect any wires directly to it. All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual. Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared - no future programming is required.
Hitag-2 programmer is universal key programmer, with additional option of key programming from dump.
Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically!
Distinctive features of Hitag2 programmer:
- ALL types of Hitag2 transponders are fully supported
- Widest range of supported cars, using Hitag2 protocol
- Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
- BMW explorer support added.
This function allows the user to calibrate the mileage in all relevant modules. Please note that regarding the vehicle models that use ABS synchronization there is the added option to disable the sync. This special function also provides the option to read and write the EEPROM and flash so that in case of any issues during calibration or others you can repair the vehicle.
After decoding of Renaultinjection computer using our RENAULT ECU RESET or by entering security code, inmost cases you can start engine, but some of injection computers can notoperate without immobiliser code stored in their memory. Diesel EDC15C3, DCU3Rand MSA15, petrol SIRIUS32 (except these for 1.4L engine) and FENIX5 for 2.0L16V engine require working unlocked (with good key) immobiliser unit or ourRenault immobiliser emulator. Include connection manual. Usetogether with RENAULT ECU RESET.
TANGO Programmer - Renault cars key maker
Additional license. Works only with Tango Programmer.